[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.4-gnuowen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-16) ) #18 SMP PREEMPT Wed May 21 16:16:35 MDT 2014
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000bf6dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6e0000-0x00000000bf7fffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 1707Y1Q, BIOS 7BETC7WW (2.08 ) 05/18/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbf6e0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 080000000 mask 0C0000000 write-back
[    0.000000]   2 base 0BF800000 mask 0FF800000 uncachable
[    0.000000]   3 base 0D0000000 mask 0F0000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [c00f0400]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36800000-0x36bfffff]
[    0.000000]  [mem 0x36800000-0x36bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x367fffff]
[    0.000000]  [mem 0x30000000-0x367fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x36c00000-0x377fdfff]
[    0.000000]  [mem 0x36c00000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017cb000, 0x017cbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36c0a000-0x375fcfff]
[    0.000000] ACPI: RSDP 000f0800 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT bf6e28e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET bf6e2a10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC bf6e2a50 000060 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG bf6e2ab0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP bf6e5d00 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT bf6e2b30 0030CA (v03 COREv4 COREBOOT 20090419 INTL 20140114)
[    0.000000] ACPI: FACS bf6e2af0 000040
[    0.000000] ACPI: SSDT bf6e5e00 000190 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2174MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017cc000, 0x017ccfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0xbf6dffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0xbf6dffff]
[    0.000000] On node 0 totalpages: 783999
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4350 pages used for memmap
[    0.000000]   HighMem zone: 556770 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f55ec000 s31360 r0 d21888 u53248
[    0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 782223
[    0.000000] Kernel command line: BOOT_IMAGE=(ahci0,1)/boot/vmlinuz-3.14.4-gnuowen root=/dev/sda1 drm.debug=0x06
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000bf6e0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3092248K/3135996K available (4113K kernel code, 324K rwdata, 1560K rodata, 480K init, 1448K bss, 43748K reserved, 2227080K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8e000 - 0xfffff000   ( 452 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc15de000 - 0xc1656000   ( 480 kB)
[    0.000000]       .data : 0xc14049c3 - 0xc15dd200   (1890 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14049c3   (4114 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5006000 soft=f5008000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 6291456 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.421 MHz processor
[    0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.84 BogoMIPS (lpj=1662421)
[    0.001026] pid_max: default: 32768 minimum: 301
[    0.001045] ACPI: Core revision 20131218
[    0.004428] ACPI: All ACPI Tables successfully acquired
[    0.005050] Security Framework initialized
[    0.005066] SELinux:  Disabled at boot.
[    0.005087] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.005095] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.005395] Initializing cgroup subsys memory
[    0.005406] Initializing cgroup subsys devices
[    0.005413] Initializing cgroup subsys freezer
[    0.005420] Initializing cgroup subsys net_cls
[    0.005426] Initializing cgroup subsys blkio
[    0.005432] Initializing cgroup subsys perf_event
[    0.005467] Disabled fast string operations
[    0.005477] mce: CPU supports 6 MCE banks
[    0.005492] CPU0: Thermal monitoring enabled (TM2)
[    0.005509] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.005509] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.005509] tlb_flushall_shift: 6
[    0.008100] Freeing SMP alternatives memory: 12K (c1656000 - c1659000)
[    0.008177] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.008613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.018628] smpboot: CPU0: Genuine Intel(R) CPU             300  @ 1.66GHz (fam: 06, model: 0e, stepping: 08)
[    0.019000] Performance Events: unsupported p6 CPU model 14 no PMU driver, software events only.
[    0.022220] x86: Booted up 1 node, 1 CPUs
[    0.022227] smpboot: Total of 1 processors activated (3324.84 BogoMIPS)
[    0.023178] devtmpfs: initialized
[    0.023815] regulator-dummy: no parameters
[    0.023895] NET: Registered protocol family 16
[    0.024071] cpuidle: using governor ladder
[    0.024078] cpuidle: using governor menu
[    0.024124] ACPI: bus type PCI registered
[    0.024192] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.024204] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.024211] PCI: Using MMCONFIG for extended config space
[    0.024218] PCI: Using configuration type 1 for base access
[    0.026189] bio: create slab <bio-0> at 0
[    0.026311] ACPI: Added _OSI(Module Device)
[    0.026319] ACPI: Added _OSI(Processor Device)
[    0.026325] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.026331] ACPI: Added _OSI(Processor Aggregator Device)
[    0.029589] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.030024] ACPI: Interpreter enabled
[    0.030040] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.030054] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.030082] ACPI: (supports S0 S3 S4 S5)
[    0.030088] ACPI: Using IOAPIC for interrupt routing
[    0.030127] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.030436] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.039044] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.039059] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.039177] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.039317] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.039374] PCI host bridge to bus 0000:00
[    0.039383] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.039391] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.039399] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.039408] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.039416] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.039425] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.039434] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.039442] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.039451] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.039460] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.039468] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.039477] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.039486] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.039494] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.039503] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.039512] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.039520] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.039529] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.039538] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.039557] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.039708] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.039724] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.039732] pci 0000:00:02.0: reg 0x14: [io  0x50a0-0x50a7]
[    0.039741] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.039750] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.039891] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.039904] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.040103] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.040129] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.040247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.040317] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.040401] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.040527] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.040666] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.040787] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.040927] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.041044] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.041185] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.041300] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.041455] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.041522] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.041627] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.041699] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.041758] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.041860] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.041936] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.041994] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.042103] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.042178] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.042246] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.042361] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.042445] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.042473] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.042583] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.042647] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.042728] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.042910] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.043031] pci 0000:00:1f.0: address space collision: [io  0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
[    0.043050] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.043061] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.043073] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.043085] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.043238] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.043259] pci 0000:00:1f.1: reg 0x10: [io  0x50a8-0x50af]
[    0.043273] pci 0000:00:1f.1: reg 0x14: [io  0x50c8-0x50cb]
[    0.043288] pci 0000:00:1f.1: reg 0x18: [io  0x50b0-0x50b7]
[    0.043302] pci 0000:00:1f.1: reg 0x1c: [io  0x50cc-0x50cf]
[    0.043317] pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]
[    0.043465] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.043491] pci 0000:00:1f.2: reg 0x10: [io  0x50b8-0x50bf]
[    0.043505] pci 0000:00:1f.2: reg 0x14: [io  0x50d0-0x50d3]
[    0.043519] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.043533] pci 0000:00:1f.2: reg 0x1c: [io  0x50d4-0x50d7]
[    0.043546] pci 0000:00:1f.2: reg 0x20: [io  0x5090-0x509f]
[    0.043561] pci 0000:00:1f.2: reg 0x24: [mem 0xe4444400-0xe44447ff]
[    0.043621] pci 0000:00:1f.2: PME# supported from D3hot
[    0.043743] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.043819] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.044081] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[    0.044115] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[    0.044159] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.044361] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.044462] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.044491] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.044501] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.044508] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.044625] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.044659] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe420ffff 64bit]
[    0.044836] pci 0000:02:00.0: supports D1
[    0.044840] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.046021] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.046036] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.046127] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.046227] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.046321] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[    0.046348] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[    0.046388] pci 0000:05:00.0: supports D1 D2
[    0.046392] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.046429] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.046507] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[    0.046531] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[    0.046633] pci 0000:05:00.1: supports D1 D2
[    0.046637] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.046736] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[    0.046761] pci 0000:05:00.2: reg 0x10: [mem 0xe2001800-0xe20018ff]
[    0.046864] pci 0000:05:00.2: supports D1 D2
[    0.046867] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.047019] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.047031] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.047038] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.047048] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.047052] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.047057] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.047061] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.047065] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.047069] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.047073] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.047077] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.047081] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.047085] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.047090] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.047094] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.047098] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.047102] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.047106] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.047110] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.047114] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.047119] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.047123] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.047194] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.047201] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[    0.047206] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.047214] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
[    0.047268] pci_bus 0000:00: on NUMA node 0
[    0.047378] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.047470] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.047557] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.047647] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.047735] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.047824] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.047911] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.048007] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.048287] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.048396] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.048410] vgaarb: loaded
[    0.048415] vgaarb: bridge control possible 0000:00:02.0
[    0.048546] SCSI subsystem initialized
[    0.048598] libata version 3.00 loaded.
[    0.048644] PCI: Using ACPI for IRQ routing
[    0.051408] PCI: pci_cache_line_size set to 64 bytes
[    0.051501] e820: reserve RAM buffer [mem 0xbf6e0000-0xbfffffff]
[    0.051710] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.051723] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.051734] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.053048] Switched to clocksource hpet
[    0.058319] pnp: PnP ACPI init
[    0.058347] ACPI: bus type PNP registered
[    0.058477] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.058487] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.058497] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.058506] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.058515] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.058524] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.058534] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.058543] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.058553] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.059104] pnp 00:01: [dma 4]
[    0.059154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.059203] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.059349] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.059360] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.059426] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.059512] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.059522] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.059531] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.059541] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.059591] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.059669] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.059734] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.059778] pnp: PnP ACPI: found 9 devices
[    0.059785] ACPI: bus type PNP unregistered
[    0.097143] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.097194] pci 0000:00:1f.0: BAR 13: [io  0x0500-0x057f] has bogus alignment
[    0.097206] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.097222] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.097233] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.097242] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.097255] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.097266] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.097282] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.097294] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.097311] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.097331] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.097354] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.097359] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.097364] pci 0000:05:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.097368] pci 0000:05:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.097382] pci 0000:05:00.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[    0.097400] pci 0000:05:00.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[    0.097409] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x20ff]
[    0.097417] pci 0000:05:00.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.097426] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
[    0.097434] pci 0000:05:00.0:   bridge window [io  0x2000-0x20ff]
[    0.097445] pci 0000:05:00.0:   bridge window [io  0x2400-0x24ff]
[    0.097456] pci 0000:05:00.0:   bridge window [mem 0xc4000000-0xc7ffffff pref]
[    0.097469] pci 0000:05:00.0:   bridge window [mem 0xc8000000-0xcbffffff]
[    0.097481] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.097490] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.097502] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.097514] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.097530] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.097534] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.097538] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.097542] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.097546] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.097550] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.097554] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.097558] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.097562] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.097566] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.097570] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.097574] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.097578] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.097582] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.097586] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.097590] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.097594] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[    0.097598] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.097602] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.097606] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.097610] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.097614] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.097618] pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
[    0.097622] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.097626] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.097630] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.097634] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.097638] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.097642] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.097646] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.097650] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.097654] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[    0.097658] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.097662] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.097666] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.097670] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.097674] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.097678] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.097681] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.097685] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[    0.097689] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[    0.097693] pci_bus 0000:05: resource 20 [mem 0xc0000000-0xfebfffff]
[    0.097697] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.097701] pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
[    0.097705] pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
[    0.097709] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[    0.097713] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff]
[    0.097757] NET: Registered protocol family 2
[    0.097962] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.098018] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.098091] TCP: Hash tables configured (established 8192 bind 8192)
[    0.098132] TCP: reno registered
[    0.098139] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.098164] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.098260] NET: Registered protocol family 1
[    0.098282] pci 0000:00:02.0: Boot video device
[    0.099526] PCI: CLS 64 bytes, default 64
[    0.099600] Unpacking initramfs...
[    0.441424] Freeing initrd memory: 10188K (f6c0a000 - f75fd000)
[    0.441954] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.442000] audit: initializing netlink subsys (disabled)
[    0.442058] audit: type=2000 audit(1400719323.441:1): initialized
[    0.442358] bounce pool size: 64 pages
[    0.442369] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.445676] VFS: Disk quotas dquot_6.5.2
[    0.445769] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.446544] msgmni has been set to 1709
[    0.446925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.446935] io scheduler noop registered
[    0.446941] io scheduler deadline registered
[    0.447074] io scheduler cfq registered (default)
[    0.447389] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.447680] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.447943] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.448213] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.448393] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.448403] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.448415] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.448445] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.448453] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.448464] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.448493] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.448505] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.448538] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.448551] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.448602] intel_idle: does not run on family 6 model 14
[    0.448716] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[    0.448732] ACPI: Sleep Button [SLPB]
[    0.448816] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[    0.448965] ACPI: Lid Switch [LID]
[    0.449078] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.449089] ACPI: Power Button [PWRF]
[    0.449360] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.449534] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.449626] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.450394] Linux agpgart interface v0.103
[    0.450438] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.450487] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.450948] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.451139] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.451205] [drm] Initialized drm 1.1.0 20060810
[    0.451703] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x27a2 flags=is_mobile,is_i945gm,has_fbc,has_hotplug,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[    0.451751] [drm:intel_detect_pch], No PCH found.
[    0.451755] [drm] Memory usable by graphics device = 256M
[    0.451763] [drm:i915_gem_gtt_init], GMADR size = 256M
[    0.451766] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[    0.452041] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[    0.452044] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[    0.452069] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.452077] [drm] Driver supports precise vblank timestamp query.
[    0.452085] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[    0.452090] i915 0000:00:02.0: Invalid ROM contents
[    0.452096] [drm:intel_parse_bios], VBT signature missing
[    0.452098] [drm] failed to find VBIOS tables
[    0.452110] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    0.452118] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at bf800000
[    0.452152] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[    0.452160] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[    0.452169] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[    0.452179] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[    0.452189] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[    0.452209] i915: render error detected, EIR: 0x00000010
[    0.452216] i915: page table error
[    0.452221] i915:   PGTBL_ER: 0x00000012
[    0.452228] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[    0.452244] i915: render error detected, EIR: 0x00000010
[    0.452250] i915: page table error
[    0.452255] i915:   PGTBL_ER: 0x00000012
[    0.452284] [drm:intel_modeset_init], 2 display pipes available.
[    0.452290] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.452293] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[    0.452298] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.452301] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[    0.452307] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.474028] [drm:intel_lvds_init], using preferred mode from EDID: 
[    0.474034] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.474040] [drm:intel_lvds_init], detected single-link lvds configuration
[    0.474110] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 1093617/4426545, sysfs interface registered
[    0.474219] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, ffff000]
[    0.476612] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    0.476618] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[    0.476740] [drm] initialized overlay support
[    0.476750] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[    0.476758] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[    0.476764] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[    0.476768] [drm:intel_modeset_readout_hw_state], [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
[    0.476773] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TV-19] hw state readout: disabled, pipe A
[    0.476777] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[    0.476781] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:VGA-1] hw state readout: disabled
[    0.476785] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:SVIDEO-1] hw state readout: disabled
[    0.476791] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    0.476794] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    0.476797] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    0.476801] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.476805] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.476808] [drm:intel_dump_pipe_config], requested mode:
[    0.476813] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.476815] [drm:intel_dump_pipe_config], adjusted mode:
[    0.476820] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.476825] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    0.476827] [drm:intel_dump_pipe_config], port clock: 0
[    0.476830] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    0.476834] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.476837] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.476840] [drm:intel_dump_pipe_config], ips: 0
[    0.476843] [drm:intel_dump_pipe_config], double wide: 0
[    0.476847] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[    0.476850] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    0.476853] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    0.476857] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.476861] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.476863] [drm:intel_dump_pipe_config], requested mode:
[    0.476868] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[    0.476871] [drm:intel_dump_pipe_config], adjusted mode:
[    0.476876] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    0.476881] [drm:intel_dump_crtc_timings], crtc timings: 45982 1024 1048 1184 1344 768 779 1 806, type: 0x0 flags: 0xa
[    0.476884] [drm:intel_dump_pipe_config], port clock: 45982
[    0.476887] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    0.476891] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.476894] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.476897] [drm:intel_dump_pipe_config], ips: 0
[    0.476900] [drm:intel_dump_pipe_config], double wide: 0
[    0.476904] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.476908] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.476912] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.476915] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.476919] [drm:check_crtc_state], [CRTC:3]
[    0.476922] [drm:check_crtc_state], [CRTC:4]
[    0.476938] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    0.476942] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[    0.476956] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    0.476962] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.476968] [drm:drm_mode_debug_printmodeline], Modeline 12:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    0.476973] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 40 43330 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    0.476979] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    0.476984] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    0.476988] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    0.476992] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    0.488016] [drm:intel_crt_detect], CRT not detected via hotplug
[    0.489016] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    0.489019] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    0.489022] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    0.489026] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    0.489300] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    0.489304] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    0.489307] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    0.489310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    0.489314] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1]
[    0.489318] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=1
[    0.489322] [drm:intel_get_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    0.489326] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    0.489336] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    0.489341] [drm:connected_sink_compute_bpp], [CONNECTOR:18:SVIDEO-1] checking for sink bpp constrains
[    0.489345] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[    0.489349] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    0.489352] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    0.489355] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    0.489358] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    0.489362] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.489365] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.489368] [drm:intel_dump_pipe_config], requested mode:
[    0.489374] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    0.489376] [drm:intel_dump_pipe_config], adjusted mode:
[    0.489381] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    0.489386] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[    0.489390] [drm:intel_dump_pipe_config], port clock: 108000
[    0.489392] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[    0.489396] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.489399] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.489402] [drm:intel_dump_pipe_config], ips: 0
[    0.489405] [drm:intel_dump_pipe_config], double wide: 0
[    0.496549] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[    0.496555] [drm:intel_update_fbc], no output, disabling
[    0.496562] [drm:intel_crtc_mode_set], [ENCODER:19:TV-19] set [MODE:0:NTSC 480i]
[    0.502233] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.502237] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.502240] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    0.502243] [drm:intel_calculate_wm], FIFO watermark level: -5
[    0.502246] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[    0.502249] [drm:i9xx_update_wm], self-refresh entries: 80
[    0.502252] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[    0.502255] [drm:i9xx_update_wm], memory self refresh enabled
[    0.520017] [drm:intel_update_fbc], disabled per chip default
[    0.520024] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.520029] [drm:intel_connector_check_state], [CONNECTOR:18:SVIDEO-1]
[    0.520033] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.520036] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.520040] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.520043] [drm:check_crtc_state], [CRTC:3]
[    0.520054] [drm:check_crtc_state], [CRTC:4]
[    0.556017] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    0.556020] [drm:intel_tv_detect_type], Unrecognised TV connection
[    0.586017] [drm:intel_release_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    0.586022] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[    0.630018] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.630022] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.630025] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    0.630029] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    0.630032] [drm:i9xx_update_wm], memory self refresh disabled
[    0.630034] [drm:intel_update_fbc], no output, disabling
[    0.630041] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.630045] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.630049] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.630052] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.630055] [drm:check_crtc_state], [CRTC:3]
[    0.630058] [drm:check_crtc_state], [CRTC:4]
[    0.630194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1] disconnected
[    0.630198] [drm:drm_setup_crtcs], 
[    0.630202] [drm:drm_enable_connectors], connector 5 enabled? yes
[    0.630205] [drm:drm_enable_connectors], connector 16 enabled? no
[    0.630208] [drm:drm_enable_connectors], connector 18 enabled? no
[    0.630211] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    0.630214] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    0.630217] [drm:drm_target_preferred], found mode 1024x768
[    0.630220] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    0.630224] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
[    0.630229] [drm:intelfb_create], no BIOS fb, allocating a new one
[    0.630233] [drm:i915_gem_object_create_stolen], creating stolen object: size=300000
[    0.630238] [drm:i915_pages_create_for_stolen], offset=0x20000, size=3145728
[    0.632452] [drm:intelfb_create], allocated 1024x768 fb: 0x00020000, bo c1c59600
[    0.632543] fbcon: inteldrmfb (fb0) is primary device
[    0.632604] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    0.632607] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    0.632609] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.632612] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    0.632614] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    0.632616] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    0.632620] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.632624] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.632625] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[    0.632628] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.632630] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[    0.632635] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[    0.632638] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[    0.632641] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    0.632643] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[    0.632645] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    0.632646] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    0.632649] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.632651] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.632652] [drm:intel_dump_pipe_config], requested mode:
[    0.632656] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.632658] [drm:intel_dump_pipe_config], adjusted mode:
[    0.632661] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.632665] [drm:intel_dump_crtc_timings], crtc timings: 54160 1024 1048 1184 1344 768 771 777 806, type: 0x48 flags: 0xa
[    0.632666] [drm:intel_dump_pipe_config], port clock: 54160
[    0.632668] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    0.632670] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    0.632672] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.632673] [drm:intel_dump_pipe_config], ips: 0
[    0.632675] [drm:intel_dump_pipe_config], double wide: 0
[    0.632677] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    0.679018] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.679020] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.679022] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    0.679024] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    0.679025] [drm:i9xx_update_wm], memory self refresh disabled
[    0.679030] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz
[    0.679239] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 4096
[    0.679243] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x768]
[    0.679884] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.679886] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    0.679887] [drm:intel_calculate_wm], FIFO watermark level: 9
[    0.679889] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.679891] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    0.679892] [drm:i9xx_update_wm], self-refresh entries: 64
[    0.679894] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    0.679896] [drm:i9xx_update_wm], memory self refresh enabled
[    0.701016] [drm:intel_update_fbc], disabled per chip default
[    0.953016] [drm:intel_panel_enable_backlight], pipe B
[    0.953019] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1093617
[    0.953023] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.953025] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.953028] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.953030] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.953032] [drm:check_crtc_state], [CRTC:3]
[    0.953034] [drm:check_crtc_state], [CRTC:4]
[    0.953062] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    0.953065] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    0.953067] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.958444] Console: switching to colour frame buffer device 128x48
[    0.958450] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    0.958452] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    0.958454] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.963558] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    0.963629] i915 0000:00:02.0: registered panic notifier
[    0.963698] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.963935] ahci 0000:00:1f.2: version 3.0
[    0.964145] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.964185] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.964289] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    0.964385] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    0.965158] scsi0 : ahci
[    0.965331] scsi1 : ahci
[    0.965482] scsi2 : ahci
[    0.965638] scsi3 : ahci
[    0.965751] ata1: SATA max UDMA/133 abar m1024@0xe4444400 port 0xe4444500 irq 44
[    0.965835] ata2: DUMMY
[    0.965865] ata3: DUMMY
[    0.965895] ata4: DUMMY
[    0.965994] ata_piix 0000:00:1f.1: version 2.13
[    0.966733] scsi4 : ata_piix
[    0.966906] scsi5 : ata_piix
[    0.967017] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[    0.969147] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[    0.971287] ata5: port disabled--ignoring
[    0.971404] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.975493] ata6: port disabled--ignoring
[    0.988828] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.990989] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.993216] mousedev: PS/2 mouse device common for all mice
[    0.995400] rtc_cmos 00:06: RTC can wake from S4
[    0.997662] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.999750] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.001949] device-mapper: uevent: version 1.0.3
[    1.004091] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.006307] TCP: cubic registered
[    1.008549] NET: Registered protocol family 10
[    1.010867] mip6: Mobile IPv6
[    1.012852] NET: Registered protocol family 17
[    1.014892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.017282] Key type dns_resolver registered
[    1.019472] Using IPI No-Shortcut mode
[    1.021590] registered taskstats version 1
[    1.024064] regulator-dummy: disabling
[    1.026115] rtc_cmos 00:06: setting system clock to 2014-05-22 00:42:04 UTC (1400719324)
[    1.444020] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    1.682028] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.033588] ata1.00: ATA-6: TOSHIBA MK8032GSX, AS111G, max UDMA/100
[    2.035634] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.038791] ata1.00: configured for UDMA/100
[    2.051155] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8032GS AS11 PQ: 0 ANSI: 5
[    2.053408] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.055583] sd 0:0:0:0: [sda] Write Protect is off
[    2.057667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.057884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.129473]  sda: sda1 sda2
[    2.131933] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.134611] Freeing unused kernel memory: 480K (c15de000 - c1656000)
[    2.136739] Write protecting the kernel text: 4116k
[    2.138909] Write protecting the kernel read-only data: 1564k
[    2.164115] udevd[80]: starting version 175
[    2.186689] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.186694] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.186698] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.257519] thermal LNXTHERM:00: registered as thermal_zone0
[    2.289341] ACPI: Thermal Zone [THM0] (66 C)
[    2.352723] [drm:i915_gem_open], 
[    2.352752] [drm:intel_crtc_cursor_set], cursor off
[    2.352756] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    2.352761] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.352766] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.352770] [drm:intel_crtc_cursor_set], cursor off
[    2.352774] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.352778] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.352782] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.352796] [drm:i915_gem_open], 
[    2.352807] [drm:intel_crtc_cursor_set], cursor off
[    2.352810] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    2.352814] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    2.352818] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.352821] [drm:intel_crtc_cursor_set], cursor off
[    2.352824] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.352828] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.352832] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.352844] [drm:i915_gem_open], 
[    2.352932] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[    2.352937] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[    2.352945] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.352949] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    2.352953] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[    2.352972] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    2.352978] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    2.352984] [drm:drm_mode_debug_printmodeline], Modeline 12:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    2.352989] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 40 43330 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    2.352995] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    2.353001] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    2.353025] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[    2.359092] thermal LNXTHERM:01: registered as thermal_zone1
[    2.363480] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[    2.363487] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    2.363491] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    2.375028] [drm:intel_crt_detect], CRT not detected via hotplug
[    2.376036] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    2.376041] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.376044] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.376048] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    2.376323] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.376327] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    2.376330] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    2.376335] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    2.376348] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[    2.376352] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    2.376355] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    2.383989] pps_core: LinuxPPS API ver. 1 registered
[    2.388024] [drm:intel_crt_detect], CRT not detected via hotplug
[    2.389026] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    2.389030] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.389034] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    2.389038] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    2.389313] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    2.389316] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    2.389319] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    2.389324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    2.389341] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[    2.389346] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1]
[    2.389349] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=1
[    2.389354] [drm:intel_get_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    2.389358] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    2.389372] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    2.389378] [drm:connected_sink_compute_bpp], [CONNECTOR:18:SVIDEO-1] checking for sink bpp constrains
[    2.389382] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[    2.389386] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    2.389390] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    2.389393] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    2.389396] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    2.389400] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.389404] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.389406] [drm:intel_dump_pipe_config], requested mode:
[    2.389412] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    2.389415] [drm:intel_dump_pipe_config], adjusted mode:
[    2.389420] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    2.389425] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[    2.389428] [drm:intel_dump_pipe_config], port clock: 108000
[    2.389431] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[    2.389435] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    2.389438] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    2.389441] [drm:intel_dump_pipe_config], ips: 0
[    2.389444] [drm:intel_dump_pipe_config], double wide: 0
[    2.401545] [drm:i9xx_update_plane], Writing base 00320000 00000000 0 0 5120
[    2.401556] [drm:intel_crtc_mode_set], [ENCODER:19:TV-19] set [MODE:0:NTSC 480i]
[    2.404563] ACPI: Thermal Zone [THM1] (49 C)
[    2.407615] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.407619] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    2.407622] [drm:intel_calculate_wm], FIFO watermark level: 9
[    2.407626] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.407629] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    2.407631] [drm:intel_calculate_wm], FIFO watermark level: -5
[    2.407634] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 1
[    2.407638] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 1, C: 2, SR 1
[    2.407641] [drm:i9xx_update_wm], memory self refresh disabled
[    2.427029] [drm:intel_update_fbc], more than one pipe active, disabling compression
[    2.427040] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    2.427046] [drm:intel_connector_check_state], [CONNECTOR:18:SVIDEO-1]
[    2.427050] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    2.427053] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    2.427057] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    2.427061] [drm:check_crtc_state], [CRTC:3]
[    2.427071] [drm:check_crtc_state], [CRTC:4]
[    2.427828] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.442216] ACPI: bus type USB registered
[    2.449046] Switched to clocksource tsc
[    2.461021] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    2.461026] [drm:intel_tv_detect_type], Unrecognised TV connection
[    2.466770] PTP clock support registered
[    2.471549] sdhci: Secure Digital Host Controller Interface driver
[    2.477108] usbcore: registered new interface driver usbfs
[    2.479791] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    2.492024] [drm:intel_release_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    2.492031] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[    2.498445] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    2.504757] sdhci: Copyright(c) Pierre Ossman
[    2.507373] usbcore: registered new interface driver hub
[    2.528571] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    2.540589] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.540595] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    2.540598] [drm:intel_calculate_wm], FIFO watermark level: 9
[    2.540601] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.540605] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    2.540608] [drm:i9xx_update_wm], self-refresh entries: 64
[    2.540611] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    2.540614] [drm:i9xx_update_wm], memory self refresh enabled
[    2.540618] [drm:intel_update_fbc], disabled per chip default
[    2.540629] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    2.540634] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    2.540638] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    2.540641] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    2.540645] [drm:check_crtc_state], [CRTC:3]
[    2.540649] [drm:check_crtc_state], [CRTC:4]
[    2.540780] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1] disconnected
[    2.541709] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[    2.541713] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1]
[    2.541717] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=1
[    2.541722] [drm:intel_get_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    2.541725] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    2.541737] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    2.541742] [drm:connected_sink_compute_bpp], [CONNECTOR:18:SVIDEO-1] checking for sink bpp constrains
[    2.541746] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[    2.541750] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    2.541754] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    2.541757] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    2.541760] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    2.541764] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.541768] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    2.541770] [drm:intel_dump_pipe_config], requested mode:
[    2.541776] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    2.541779] [drm:intel_dump_pipe_config], adjusted mode:
[    2.541784] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    2.541789] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[    2.541792] [drm:intel_dump_pipe_config], port clock: 108000
[    2.541795] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[    2.541799] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    2.541802] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    2.541805] [drm:intel_dump_pipe_config], ips: 0
[    2.541808] [drm:intel_dump_pipe_config], double wide: 0
[    2.542045] usbcore: registered new device driver usb
[    2.557690] [drm:i9xx_update_plane], Writing base 00320000 00000000 0 0 5120
[    2.557701] [drm:intel_crtc_mode_set], [ENCODER:19:TV-19] set [MODE:0:NTSC 480i]
[    2.562731] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.566049] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.569493] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.569497] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    2.569500] [drm:intel_calculate_wm], FIFO watermark level: 9
[    2.569504] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.569507] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    2.569509] [drm:intel_calculate_wm], FIFO watermark level: -5
[    2.569512] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 1
[    2.569516] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 1, C: 2, SR 1
[    2.569519] [drm:i9xx_update_wm], memory self refresh disabled
[    2.569846] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[    2.573316] uhci_hcd: USB Universal Host Controller Interface driver
[    2.577206] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.582466] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.589021] [drm:intel_update_fbc], more than one pipe active, disabling compression
[    2.589030] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    2.589036] [drm:intel_connector_check_state], [CONNECTOR:18:SVIDEO-1]
[    2.589040] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    2.589044] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    2.589047] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    2.589051] [drm:check_crtc_state], [CRTC:3]
[    2.589061] [drm:check_crtc_state], [CRTC:4]
[    2.591449] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    2.592549] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.596951] mmc0: no vqmmc regulator found
[    2.600542] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[    2.603377] mmc0: no vmmc regulator found
[    2.606247] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.610078] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.613019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.616200] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[    2.620460] usb usb1: Product: UHCI Host Controller
[    2.623318] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    2.623321] [drm:intel_tv_detect_type], Unrecognised TV connection
[    2.623354] usb usb1: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.626261] usb usb1: SerialNumber: 0000:00:1d.0
[    2.629438] hub 1-0:1.0: USB hub found
[    2.632296] hub 1-0:1.0: 2 ports detected
[    2.635449] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.638244] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    2.643606] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[    2.646440] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.649248] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.651968] usb usb2: Product: UHCI Host Controller
[    2.654677] [drm:intel_release_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    2.654682] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[    2.654700] usb usb2: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.657441] usb usb2: SerialNumber: 0000:00:1d.1
[    2.660425] hub 2-0:1.0: USB hub found
[    2.663143] hub 2-0:1.0: 2 ports detected
[    2.666098] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.669827] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    2.677553] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    2.700166] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:29:a6:54
[    2.702887] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    2.702891] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    2.702894] [drm:intel_calculate_wm], FIFO watermark level: 9
[    2.702897] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    2.702900] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    2.702903] [drm:i9xx_update_wm], self-refresh entries: 64
[    2.702907] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    2.702910] [drm:i9xx_update_wm], memory self refresh enabled
[    2.702913] [drm:intel_update_fbc], disabled per chip default
[    2.702923] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    2.702928] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    2.702932] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    2.702936] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    2.702939] [drm:check_crtc_state], [CRTC:3]
[    2.702943] [drm:check_crtc_state], [CRTC:4]
[    2.703081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1] disconnected
[    2.704039] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.712269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.712272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.712274] usb usb3: Product: UHCI Host Controller
[    2.712276] usb usb3: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.712278] usb usb3: SerialNumber: 0000:00:1d.2
[    2.713067] hub 3-0:1.0: USB hub found
[    2.713078] hub 3-0:1.0: 2 ports detected
[    2.713402] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.713414] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    2.713466] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    2.713533] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.713536] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.713538] usb usb4: Product: UHCI Host Controller
[    2.713541] usb usb4: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    2.713543] usb usb4: SerialNumber: 0000:00:1d.3
[    2.714108] hub 4-0:1.0: USB hub found
[    2.714119] hub 4-0:1.0: 2 ports detected
[    2.715384] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[    2.727646] xor: measuring software checksum speed
[    2.737085]    pIII_sse  :  4308.000 MB/sec
[    2.747008]    prefetch64-sse:  4700.000 MB/sec
[    2.747058] xor: using function: prefetch64-sse (4700.000 MB/sec)
[    2.764027] raid6: mmxx1     1621 MB/s
[    2.782802] raid6: mmxx2     1664 MB/s
[    2.799108] raid6: sse1x1    1175 MB/s
[    2.816116] raid6: sse1x2    1542 MB/s
[    2.833037] raid6: sse2x1    1835 MB/s
[    2.850022] raid6: sse2x2    2070 MB/s
[    2.850064] raid6: using algorithm sse2x2 (2070 MB/s)
[    2.850118] raid6: using intx1 recovery algorithm
[    2.856283] bio: create slab <bio-1> at 1
[    2.857828] Btrfs loaded
[    2.857893] BTRFS: selftest: Running btrfs free space cache tests
[    2.857959] BTRFS: selftest: Running extent only tests
[    2.858033] BTRFS: selftest: Running bitmap only tests
[    2.858099] BTRFS: selftest: Running bitmap and extent tests
[    2.858175] BTRFS: selftest: Free space cache tests finished
[    2.858236] BTRFS: selftest: Running extent buffer operation tests
[    2.858302] BTRFS: selftest: Running btrfs_split_item tests
[    2.858377] BTRFS: selftest: Running find delalloc tests
[    2.966628] BTRFS: selftest: Running btrfs_get_extent tests
[    2.966804] BTRFS: selftest: Running hole first btrfs_get_extent test
[    3.018027] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    3.070130] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[    3.077395] random: nonblocking pool is initialized
[    3.180511] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[    3.182637] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.184808] usb 4-2: Product: Biometric Coprocessor
[    3.186967] usb 4-2: Manufacturer: STMicroelectronics
[    3.211086] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.976018] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=0
[   19.379919] Adding 3906556k swap on /dev/sda2.  Priority:-1 extents:1 across:3906556k 
[   19.458387] udevd[386]: starting version 175
[   19.738328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.738333] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[   19.757372] ehci-pci: EHCI PCI platform driver
[   19.795845] ACPI: AC Adapter [AC] (on-line)
[   19.795985] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20131218/ac-77)
[   19.807656] lp: driver loaded but no devices found
[   19.820346] usb 4-2: USB disconnect, device number 2
[   19.820732] ehci-pci 0000:00:1d.7: EHCI Host Controller
[   19.820745] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   19.820765] ehci-pci 0000:00:1d.7: debug port 1
[   19.828264] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[   19.828279] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[   19.834031] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   19.834129] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[   19.834133] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.834137] usb usb5: Product: EHCI Host Controller
[   19.834141] usb usb5: Manufacturer: Linux 3.14.4-gnuowen ehci_hcd
[   19.834145] usb usb5: SerialNumber: 0000:00:1d.7
[   19.834473] hub 5-0:1.0: USB hub found
[   19.834487] hub 5-0:1.0: 8 ports detected
[   19.855248] hub 1-0:1.0: USB hub found
[   19.855264] hub 1-0:1.0: 2 ports detected
[   19.880393] hub 2-0:1.0: USB hub found
[   19.880410] hub 2-0:1.0: 2 ports detected
[   19.880934] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x0
[   19.880937] microcode: Missing Free firmware
[   19.896898] Monitor-Mwait will be used to enter C-1 state
[   19.901252] hub 3-0:1.0: USB hub found
[   19.901267] hub 3-0:1.0: 2 ports detected
[   19.901393] tsc: Marking TSC unstable due to TSC halts in idle
[   19.901428] ACPI: acpi_idle registered with cpuidle
[   19.906439] Switched to clocksource hpet
[   19.922213] hub 4-0:1.0: USB hub found
[   19.922231] hub 4-0:1.0: 2 ports detected
[   19.922829] ACPI Warning: SystemIO range 0x00000528-0x0000052f conflicts with OpRegion 0x00000500-0x0000057f (\PMIO) (20131218/utaddress-258)
[   19.922838] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.922843] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[   19.922850] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.922853] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[   19.922859] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.922862] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.934559] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[   19.957223] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   20.056833] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[   20.056840] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[   20.056846] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
[   20.056859] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
[   20.056863] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[   20.056869] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[   20.056880]  excluding 0xe1ef0000-0xe20fffff
[   20.056887] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[   20.056891] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[   20.056925]  excluding 0xe2100000-0xe40fffff
[   20.152681] cfg80211: Calling CRDA to update world regulatory domain
[   20.158665] ACPI: Battery Slot [BAT0] (battery absent)
[   20.158873] ACPI: Battery Slot [BAT1] (battery absent)
[   20.158926] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.176672] Non-volatile memory driver v1.3
[   20.291461] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   20.291465] thinkpad_acpi: http://ibm-acpi.sf.net/
[   20.291468] thinkpad_acpi: ThinkPad BIOS 7BETC7WW (2.08 ), EC 7BHT40WW-3.4
[   20.291470] thinkpad_acpi: Lenovo ThinkPad X60, model 1707Y1Q
[   20.291473] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[   20.291476] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[   20.296628] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   20.310588] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   20.324637] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   20.332040] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[   20.401504] coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!
[   20.471042] cfg80211: World regulatory domain updated:
[   20.471047] cfg80211:  DFS Master region: unset
[   20.471050] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.471054] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.471058] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.471061] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.471064] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.471067] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.596058] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[   20.659044] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   20.659071]  excluding 0xf0000-0xfffff
[   20.659096] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   20.659133]  excluding 0xa0000000-0xa0ffffff
[   20.659156] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   20.659193]  excluding 0x60000000-0x60ffffff
[   20.667427] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   20.677895] ath: phy0: Enable LNA combining
[   20.679857] ath: EEPROM regdomain: 0x60
[   20.679859] ath: EEPROM indicates we should expect a direct regpair map
[   20.679863] ath: Country alpha2 being used: 00
[   20.679865] ath: Regpair used: 0x60
[   20.686950] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[   20.739580] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.740243] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf9600000, irq=17
[   20.962082] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[   20.962092] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   20.962099] usb 4-2: Product: Biometric Coprocessor
[   20.962105] usb 4-2: Manufacturer: STMicroelectronics
[   20.992036] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=0
[   21.294993] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[   21.295071] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   21.394832] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   21.396885] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   21.397733] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   21.398305] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   21.399106] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   21.411703] init: failsafe main process (732) killed by TERM signal
[   21.471687] ppdev: user-space parallel port driver
[   21.528739] Bluetooth: Core ver 2.18
[   21.528793] NET: Registered protocol family 31
[   21.528794] Bluetooth: HCI device and connection manager initialized
[   21.528803] Bluetooth: HCI socket layer initialized
[   21.528805] Bluetooth: L2CAP socket layer initialized
[   21.528818] Bluetooth: SCO socket layer initialized
[   21.574704] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.574705] Bluetooth: BNEP filters: protocol multicast
[   21.574714] Bluetooth: BNEP socket layer initialized
[   21.694239] Bluetooth: RFCOMM TTY layer initialized
[   21.694250] Bluetooth: RFCOMM socket layer initialized
[   21.694257] Bluetooth: RFCOMM ver 1.11
[   22.450317] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
